Softer | Stronger | Smarter
Nolathane
Vehicle Search
Vehicle
Search
OR
Nolathane
46398G
Rear Trailing Arm - Centre Pivot Bushing Kit
*** CONTACT NOLATHANE ***
46398G
Rear Trailing Arm - Centre Pivot Bushing Kit
*** CONTACT NOLATHANE ***
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge click to enlarge click to enlarge
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm centre pivot bushings have failed. Nolathane's centre pivot bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing 'grease free'! Backed up by a Limited Lifetime Warranty. Replace these worn parts with Nolathane bushings ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Kits Required: 2
Warranty: Limited Lifetime Warranty
Kit Contents: 1 Bushing, 1 Pin, Install Guide
Install Guide: Download Here
Important Notes
Single - 80mm OD - fitter friendly design
US $ NAN
shipping
Calculate shipping?
Click here for rates & other info
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Precisely placed dampening voids further reduces harshness from sudden road inputs.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
This kit is covered by a limited lifetime warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
 
Features
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Specially bonded design for optimised strength typically required in high load bearing applications.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Precisely placed dampening voids further reduces harshness from sudden road inputs.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
This kit is covered by a limited lifetime warranty including parts and labour.
Install guide included providing detailed instructions on how to install your new purchase .
Kit Specifications
Bush
Type
Bush
Qty
OD
(A)
ID
(B)
L
(C)
FL
(D)
FLOD
(E)
C/Tube
QTY
C/Tube
Size
Similar
Bushing Size
10 1 80 mm 22.3 mm 37.75 mm 13 mm 100 mm click here
Looking for that hard-to-find part? Start your search here Nolathane Bushing Type & Size Register
Kit Specifications
Bush Type 10
Bush Qty 1
OD (A) 80 mm
ID (B) 22.3 mm
L (C) 37.75 mm
FL (D) 13 mm
FLOD (E) 100 mm
C/Tube QTY
C/Tube Size
Similar Bushing Size click here

Looking for that hard-to-find part? Start your search here Nolathane Bushing Type & Size Register

Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download 3 hrs DIY - With specialist tools Yes
Press Sleeve #
(IN)
Press Plate #
(IN)
Press Sleeve #
(OUT)
Press Plate #
(OUT)
Support
Sleeve #
Press
Plate #
Threaded
Rod #
Press In/Out
Kit
N/A EVEN B 11 ODD B 14 EVEN B M16 NTK001

Use the above press Sleeves, Plates and Rods from the Nolathane Press In/Out kit NTK001 to aid in the ease of removing old worn and broken suspension bushings and installing New Nolathane bushings.

Installation
Install
Guide
Fitment
Time
Degree of
Difficulty
Recommend
Wheel Alignment
Click to Download 3 hrs DIY - With specialist tools Yes
Press Sleeve # (IN) N/A
Press Plate # (IN) EVEN B
Press Sleeve # (OUT) 11
Press Plate # (OUT) ODD B
Support Sleeve # 14
Press Plate # EVEN B
Threaded Rod # M16
Press In/Out Kit NTK001

Use the above press Sleeves, Plates and Rods from the Nolathane Press In/Out kit NTK001 to aid in the ease of removing old worn and broken suspension bushings and installing New Nolathane bushings.

Videos

How hard is Nolathane?

Nolathane Technical Ambassador Mark Larkham talks small cars
Videos

How hard is Nolathane?

Nolathane Technical Ambassador Mark Larkham talks small cars
46398G
Vehicle Applications
46398G is suitable for the following vehicles. Select a vehicle for specific fitment details:
HONDA CIVIC 1988-1993 - CIVIC IV EC, ED, EE
HONDA CIVIC 1991-1995 - CIVIC V EG, EH
HONDA CIVIC 1994-2000 - CIVIC VI EJ, EK
HONDA CONCERTO 1988-1993 - CONCERTO HW, MA
HONDA CR-V 1997-2001 - CR-V RD1-RD3
HONDA CR-X 1987-1992 - CR-X ED, EE
HONDA CR-X 1992-1998 - CR-X EG, EH
HONDA INTEGRA 1993-2001 - INTEGRA DC2, DC4