Softer | Stronger | Smarter
Nolathane
Vehicle Search
Vehicle
Search
OR
Nolathane
46346
Rear Control Arm Lower Rear - Outer Bushing Kit
*** CONTACT NOLATHANE ***
46346
Rear Control Arm Lower Rear - Outer Bushing Kit
*** CONTACT NOLATHANE ***
click to enlarge
click to enlarge click to enlarge click to enlarge click to enlarge click to enlarge click to enlarge click to enlarge
Providing +/- 1.5º camber adjustment (on car), Nolathane's kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres.
Kits Required: 1
Warranty: Limited Lifetime Warranty
Kit Contents: 8 Bushings, 4 Tubes, Install Guide, Grease
Install Guide: Download Here
Important Notes
Suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts in hub
US $ NAN
shipping
Calculate shipping?
Click here for rates & other info
Features
✓
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
✓
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
✓
Internal grease reservoirs provide continual self-lubrication for optimum friction management.
✓
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
✓
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
✓
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
✓
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
✓
This kit is covered by a limited lifetime warranty including parts and labour.
✓
Install guide included providing detailed instructions on how to install your new purchase .
 
Features
✓
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
✓
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
✓
Internal grease reservoirs provide continual self-lubrication for optimum friction management.
✓
Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
✓
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
✓
Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
✓
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
✓
This kit is covered by a limited lifetime warranty including parts and labour.
✓
Install guide included providing detailed instructions on how to install your new purchase .
Kit Specifications
Bush
Type		 Bush
Qty		 OD
(A)		 ID
(B)		 L
(C)		 FL
(D)		 FLOD
(E)		 C/Tube
QTY		 C/Tube
Size		 Similar
Bushing Size
1 8 36.9 mm 25.5 mm 24.4 mm 5.4 mm 46 mm 4 25.4x12.2x51 mm click here
Looking for that hard-to-find part? Start your search here Nolathane Bushing Type & Size Register
Alignment Type Adjustment Type On Car Adjustable Adjustment Notes
Camber Eccentric No adds +/- 1.5deg
Kit Specifications
Bush Type 1
Bush Qty 8
OD (A) 36.9 mm
ID (B) 25.5 mm
L (C) 24.4 mm
FL (D) 5.4 mm
FLOD (E) 46 mm
C/Tube QTY 4
C/Tube Size 25.4x12.2x51 mm
Similar Bushing Size click here

Looking for that hard-to-find part? Start your search here Nolathane Bushing Type & Size Register

Alignment Type Camber
Adjustment Type Eccentric
On Car Adjustable No
Adjustment Notes adds +/- 1.5deg
Installation
Install
Guide		 Fitment
Time		 Degree of
Difficulty		 Recommend
Wheel Alignment
Click to Download 3 hrs DIY - With specialist tools Yes
Press Sleeve #
(IN)		 Press Plate #
(IN)		 Press Sleeve #
(OUT)		 Press Plate #
(OUT)		 Support
Sleeve #		 Press
Plate #		 Threaded
Rod #		 Press In/Out
Kit
N/A N/A 02 EVEN A 05 ODD A M12 NTK001

Use the above press Sleeves, Plates and Rods from the Nolathane Press In/Out kit NTK001 to aid in the ease of removing old worn and broken suspension bushings and installing New Nolathane bushings.

Installation
Install
Guide		 Fitment
Time		 Degree of
Difficulty		 Recommend
Wheel Alignment
Click to Download 3 hrs DIY - With specialist tools Yes
Press Sleeve # (IN) N/A
Press Plate # (IN) N/A
Press Sleeve # (OUT) 02
Press Plate # (OUT) EVEN A
Support Sleeve # 05
Press Plate # ODD A
Threaded Rod # M12
Press In/Out Kit NTK001

Use the above press Sleeves, Plates and Rods from the Nolathane Press In/Out kit NTK001 to aid in the ease of removing old worn and broken suspension bushings and installing New Nolathane bushings.

Videos

Mark Larkham Talks Camber

Uneven Tyre Wear

Larko Talks Family Movers
Videos

Mark Larkham Talks Camber

Uneven Tyre Wear

Larko Talks Family Movers
46346
Vehicle Applications
46346 is suitable for the following vehicles. Select a vehicle for specific fitment details:
CHEVROLET CAMARO 2011-2015 - CAMARO FR 5TH GEN
HOLDEN CALAIS 2006-2013 - CALAIS VE
HOLDEN CAPRICE 2006-2013 - CAPRICE WM
HOLDEN COMMODORE 2006-2013 - COMMODORE VE
HOLDEN STATESMAN 2006-2013 - STATESMAN WM
HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
HSV GRANGE 2006-2013 - GRANGE WM
HSV GTS 2006-2013 - GTS E SERIES
HSV MALOO 2007-2013 - MALOO E SERIES
HSV SENATOR 2006-2013 - SENATOR E SERIES
HSV W427 2008-2009 - W427 E SERIES